5 inch 480×854 RGB 40pin 1000nit IPS TFT LCD Module
Drawing
Parameter
InterfaceProduct detail
Product Description
H050HHD40I1K002 is a high-brightness 5-inch TFT LCD module. This LCD screen is of vertical structure and adopts IPS full-view technology, supporting a 178° wide viewing angle, ensuring stable color and no obvious color deviation under different angles. The resolution is 480×854, with an RGB 40-pin interface, using the ST7701S driver IC. It has a brightness of 1000 nit and can be viewed in sunlight. The operating temperature range can withstand -20°C to +70°C. An optional capacitive touch screen (TP) is available, supporting multi-touch, enhancing the human-computer interaction experience. This 5-inch TFT LCD Display is mainly applied in industrial equipment: used for HMI human-machine interface, handheld detectors, industrial control panels, etc. It has high requirements for stability and durability. Medical electronics: suitable for portable medical devices, such as monitors, ultrasound probe terminals, etc. Some products meet medical-grade standards. Smart home: integrated into smart locks, thermostats, home appliance control screens, etc. It supports customized UI and animation effects. Consumer electronics: commonly found in low-end smartphones, outdoor rugged phones, POS machines, vehicle aftermarket equipment, drone remote controllers, etc. Education and IoT terminals: can be used in teaching instruments, IoT gateway displays, supporting access to Raspberry Pi and other development platforms. We provide customized services, including brightness adjustment, FPC soft board length, touch function installation, and expansion of the working temperature range, to meet the needs of special environmental usage.
Mechanical Drawing
Specification parameters
Feature |
Spec |
Model Name |
H050HHD40I1K002 |
LCD Size |
5 inch |
Display Format |
480×854 |
Interface |
RGB 40pin |
Luminance |
1000 cd/m2 |
Touch screen |
None, optional |
Viewing Direction |
ALL |
Color Depth |
16.7M |
Driver IC |
ST7701S |
LCM (W x H x D) (mm) |
66.40* 120.05* 2.1 |
Active Area(mm) |
62.63 x 109.65 |
Operating Temperature |
-20℃ ~ +70℃ |
Storage Temperature |
-30℃ ~ +80℃ |
Operating Voltage |
12V |
Interface definition
|
PIN No. |
SYMBOL |
Function |
|
1 |
LEDK |
Backlight LED Cathode |
|
2 |
LEDA |
Backlight LED Anode. |
|
3 |
GND |
Ground |
|
4 |
VCC(2.8V) |
Power supply |
|
5-12 |
R0-R7 |
Data bus |
|
13-20 |
G0-G7 |
Data bus |
|
21-28 |
B0-B7 |
Data bus |
|
29 |
GND |
Ground |
|
30 |
PCLK |
Pixel clock signal in RGB I/F |
|
31 |
DISP(NC) |
No connection |
|
32 |
HSYNC |
Horizontal sync. Signal in RGB I/F. |
|
33 |
VSYNC |
Vertical sync. Signal in RGB I/F. |
|
34 |
DEN |
Data enable signal in RGB I/F DE mode. |
|
35 |
NC |
No connection |
|
36 |
GND |
Ground |
|
37 |
RESET |
Reset Signal pin (“Low” is enable) |
|
38 |
SDA |
Serial input signal in SPI I/F |
|
39 |
SCL |
A synchronous clock signal in SPI I/F |
|
40 |
CS |
Chip Select input pin. (Active Low) |